4334 Shares

First time boot, no video and no post beep?

First time boot, no video and no post beep? Topic: Computer case screw lock
June 20, 2019 / By Arista
Question: i just built my very first computer yesterday. i tried to boot it for the first time and all the fans spin and led's light up, but no signal to my tv that im using as a monitor. its connected to the computer through hdmi. at that time i didnt even have a case speaker on the motherboard for the post beep so i just now went and picked one up. i plugged it in and theres no post beep at all. ive gone through loads of checklists and ive done everything right it seems. i have no idea whats wrong. -no there arent any standoffs under the motherboard that arent going through a hole -yes i connected both the 8 pin and 4 pin connectors from the psu to the motherboard -yes my cpu fan is connected to the correct input and not the chassis fan input -yes my graphics card fans are spinning too so does anyone have any idea whats going on? im beyond confused and pis‍sed off. my motherboard has no onboard graphics so i dont even have a way to connect vga. plus that still doesnt explain why there is no post beep. i just did more research and i think the processor might be screwed. the cpu socket on the motherboard is am3 which is a pain in the a‍ss especially for new builders because it takes an absolutely ridiculous amount of force to lock which feels sketchy. well i tried to lift the heat sink up and the processor came with it while it was locked into the motherboard. would that bend the pins or something? and does the processor need to work for there to be a post beep?
Best Answer

Best Answers: First time boot, no video and no post beep?

Zebinah Zebinah | 9 days ago
There should have been almost no force used to lock the processor in place. With the lock lever up, the cpu should sit loosely in the socket. Once the lock level is down it should be impossible to move the processor and the lever should have went down with very little force. Something is wrong there. Also disconnect any extra wires that aren't strictly necessary for the operation of the computer until you have this figured out. All it takes is a short in a usb cable that is hooked up to nothing, and the computer won't start up. The only items that are necessary at this point is the motherboard, PSU, Processor, processor fan, ram, power switch, and video card(unless there is built-in video on the motherboard). Until the system boots visually, don't connect anything else.
👍 286 | 👎 9
Did you like the answer? First time boot, no video and no post beep? Share with your friends

We found more questions related to the topic: Computer case screw lock


Zebinah Originally Answered: First time boot, no video and no post beep?
There should have been almost no force used to lock the processor in place. With the lock lever up, the cpu should sit loosely in the socket. Once the lock level is down it should be impossible to move the processor and the lever should have went down with very little force. Something is wrong there. Also disconnect any extra wires that aren't strictly necessary for the operation of the computer until you have this figured out. All it takes is a short in a usb cable that is hooked up to nothing, and the computer won't start up. The only items that are necessary at this point is the motherboard, PSU, Processor, processor fan, ram, power switch, and video card(unless there is built-in video on the motherboard). Until the system boots visually, don't connect anything else.
Zebinah Originally Answered: First time boot, no video and no post beep?
The motherboard if new would be set to VGA onboard. You will NEED a monitor connected to the onboard graphics card for the first time to be able to access the BIOS and change it. Sorry it's how they come out of the box! You could also try just one bank of RAM to start with and work your way through. Maybe something is already busted(when you bought it) and needs taking back to the shop.

Silver Silver
The motherboard if new would be set to VGA onboard. You will NEED a monitor connected to the onboard graphics card for the first time to be able to access the BIOS and change it. Sorry it's how they come out of the box! You could also try just one bank of RAM to start with and work your way through. Maybe something is already busted(when you bought it) and needs taking back to the shop.
👍 120 | 👎 8

Silver Originally Answered: Is there time for video games in high school?
It really depends on the high school you're at. I'm currently in high school and I have time every day to play video games, as long as I don't have a grade below an A.
Silver Originally Answered: Is there time for video games in high school?
NO! merely confirm you stability it sluggish properly. I continuously could play video games for first 2 hours or so consume dinner then have approximately 3 to 4 hours of relaxing and homework. in case you play a game then you definitely would desire to do homework desirable after the prepare is over get all the examining executed then you definitely can play video games. I even have a 4.0 and that i performed frequently. i finished although the final 2 months because of the fact of a surplus of two activities and initiatives, yet through no potential do you may supply up thoroughly. i come across it as a advantages to do properly and concentration on the job forward.

If you have your own answer to the question computer case screw lock, then you can write your own version, using the form below for an extended answer.